Professional Track Support System for Track Lighting at the shows:
This is the final piece of the puzzle that we had tp put together, a sturdy track support system that put the lights out over the show cases. This system is also height adjustable from 4' to 7' making assembly very.
The complete Professional Track Support System is only $325.00 plus UPS Ground shipping. This is a special order item and normally takes two weeks.
Each Track Support System contains two adjustable (4' to 7') upright poles, two 18" x 18" x 3/16" base plates with 2" screw in base pin, one telescopic, three section, cross bar with stops at 8', 9' and 10' and two custom made, double thickness 18" valance hangars to get your lights out over the show cases, $284.10. These Track Support Systems are special order only and may take a two week delivery time and are shipped UPS Ground.
The above picture is also from the Sharonville Convention Center showing an end view, 12/13/97.
The picture above is of my booth at a gem and jewelry show at the Sharonville Convention Center, Cincinnati, OH using the SoLux Lamps with the Track Support System, 12/13/97. Note I used two support systems and a common center support upright. It is also recommended that you use a 3" C clamp where the upright pole crosses the table and then use wire ties to secure the poles to the C clamp to better support your setup.
The picture above is of the Upright Adjustable Pole, Valance Hangar and the Base Plate